TRUMPF TRUMATIC L6050 (year 2006)In working condition. For large format works.Working hours Beam On: 40.000Working area: X-Axis: 6000 mm. Y-Axis: 2000 mm.Z-Axis: 115 mm.Max. Workpiece weight: 2800 kg.Maximum thickness: Mild Steel: 25 mm. Stainless Steel: 25 mm.  Aluminium: 15 mm.Max. Axial speeds: Axis parallel: 200 m/min. Simultaneous approx.: 300 m/min.Laser power: 6000 W - TLF 6000
Wavelength: 10.6 μm 
Accuracy: Smallest programmable increm

Power Shears MARIANIType 3000x3mmMotorized rear registerHydraulic blank holderManual blade gapUsed

Hydraulic Shears LVD
Type HST-C
Model 4050x6mm
Motorized rear register
Tilt rake angle
Blade gap
Dimensions positioner ELGO 85P
Used

Press brake Universal
Type: 4000x160 ton
Manual rear register
Used

Hydraulic Press brake Imal
Type 3000x80 ton
2 axes dimension positioner
Upper tools and lower die
Multi V dies
Uses

Power shears Minali
type 2000x5mm 
Pneumatic clutch
Motorized rear register
Hydraulic blank holder
Used

Hydraulic shears FARINA
Type 4100x4/5mm
Motorized rear register
PRG 910
Gap 500
Motorized rake angle
Rapid manual blade gap
Used

Used hydraulic press brake
Brand: Fermo Riboldi
type: 3000x60 ton
Motorized backgauge 

Ignition console - ignition console 078172 hypertherm original spare part in stock for plasma sheet metal cutting machines 

gas console manual hypertherm code id 078170 - original spare part hyperformance plasma manual gas console for plasma cutting

Gas torch valve unit for Hypertherm brand plasma sheet metal cutting machine product code 123748 - original spare parts

original spare part hypertherm 123679 gas source torch cable 15 meters for plasma cutting machines for sheet metal, in very good condition - product in stock ready for delivery

Hidraulic press brake FARINA
Mod. 6000x130 Ton
CNC 2 Axes
manual rear Register 
used

Panel Bender SALVAGNINI
Mod. P4-1712
Max bending lenght 1700 mm
Max bending height 127mm
Max bending thickness 2,0 mm
Max sheet width 1410 mm
used

Section-bending machine SERTOMMOD. PP200Nro rolls 3Diameter main roll 630 mmDiametro side roll 540 mmYear 1991Dimensions: 2100x2700x3100 mmWeight kg 19600Used

Press brake HACO
Mod. 1250x35 ton
CNC 4 Axes
Completly Overhauled
Used

TCI SM M-2060 waterjet cutting machine. Cutting area:6000x2000 mm. Pneumatic pressure entrance:6 BAR. Water pressure entrance: 3.5 BAR. Working pressure water:6200 BAR. Power:50 Kw (380 V - 50 Hz). Approximate machine weight:7000 Kgs. Year:2011.
Equipped with:
Three 2D heads and one 3D head:One 2D head is in operative conditions
1 ton feeder
Pressure pump of 6200 BAR

KLINSMAN RPP 125/320 press brake. Pressing force:125 Tn. Working length:3200 mm. Distance between columns:2700 mm. Ram travel:130 mm. Ram travel adjustment:85 mm. Max distance between table and ram:380 mm. Throat depth:320 mm. Table width:200 mm. Motor power:7.5 Kw. Approx machine weight:8300 Kgs. Machine dimensions:3500x1600x2600 mm.
Equipped with:
Multiple mouth dies
Punch
Muss die and punch:835 mm
Backgauge:digitalized
Ram:digitalized

1250X2,5 MM BAYKAL Guillotinein good condition, maintained.

2007 model Apk 121 Profile BendingAkyapakHydraulic Pullerİstanbul- Turkey

Trimming-beading machines SMM 400 for working operations, such as beading, trimming, flanging, curling, and lock-seaming, on round and/or polygonal section flat or drawn sheet metal elements.
Max diameter or diagonal of the piece to be processed: 400 mm.

Trump TruPunch 1000RYear of construction 2006Operating hours 13,000h
Control BoschTravel range: 2070 x 1270 mmwith repositioning 2500 x 1270 mm
multitool
tapping
MultiBend
Sign
Fast forming
Low-scratch machining
Sliding support table
2 clamps
with 10 setup cassettes and die plate

TruLaser 3040 (L32) 4kW
Year of construction 2009Machine hours: 41.000h / 19.500h
standard FeaturesClosed machine frame with integrated laser unit- Movement unit for high-precision machining- Torque drive in combination with linear direct drives- Closed beam guidance- one-head strategy- Cooling unit- Automatic pallet changer longitudinal direction- Wide longitudinal conveyor belt- Ergonomic control panel with touch color screen- Workroom lighting- Position laser diode- Spraying device-

TruBend 5130 (B23)

Year 2017
Machine hours 4000h

Press bar running time: approx. 350 hours
Number of strokes: approx. 20000 strokes
Press force: 130 to
Bending length: 3230 mm

standard Features
Stable machine frame
- Press beam annealed stress-relieved
- Spherical bearing of the press beam with inclination
- On-Demand Servo Drive with 4-cylinder technology
- Length measuring system (y-axis) with dynamic spring compensa

Trumpf TC 6000L-1600 3200 Watt FMC
Punch-laser machineTrumpf TC 6000 L - 1600 FMC (Automated)Year of construction 20083200 wattsHours: approx. 37000/33500 / 8150h, May 2018Travel range: 3000 x 1500mm
MultiBendMultiToolGewindeformenRollformenSignierenSoftpunchAdaptive stroke calibration
striplineControlLineNitroLineSprintLineContourLineFocusLine
4 clamping clawsrepositioning3 x 5 "/ 7.5" and 9 "cutting headsBrush table design
SheetMasterGripmasterScissorsTrumSort R42 load

Technical details
Type: Bystar 4020Building year: 2005Total weight : 6500 Kg
Equipaggiamento base bystar 4020 4400watt• Risonatore Laser 4400watt • Inclusi tavola intercambiabile • Impianto di raffreddamento • Armadi con CNC, STL, LAS• Protezione operatore nell’area di taglio• 2 teste di taglio• Assorbitore di riflessi• Cross-Jet
OPZIONI• Impianto di depolverizzazione (3500 m3/h DF PR06)• Incluso sistema di pre

Grotzinger eccentric press. Max force:100 Tn. Table dimensions: 900x600 mm. Table hole:350x250 mm. Hammer:700x450 mm. Maximum height from table to lower post:600 mm. Adjustable strokes:10-16-31-45-60-70-81-91-99-105-111 mm. Spindle travel:100 mm. Number of strokes per minute:105. Pneumatic clutch. Motor power:20 CV. Approx machine weight:10.000 Kgs. Machine dimensions:1900x1500x3000 mm. Equipped with:Sensitive selector and automatic strokes. Buttons, pedal and emergency stop.
Machine c

Profile bending machine BPR. Model: CPS-35. Axes Ø:35 mm. Axes length:80 mm. Wheels Ø:132-142 mm. Rollers: number 3. Height axes wheels:780 mm. Inner Ø cylinder:50 mm. It can work both horizontally and vertically. Approx machine weight:350 kgs. Machine dimensions: 680x930x1055 mm. Year:1998. Equipped with:Digital readouts. Sets of wheels for bending handrail. 

BEHRENS longitudinal shear. Model: 5959. Max coil width:1500 mm. Sheet thickness:1.5 mm. Ø upper axis:70 mm. Ø lower axis:70 mm. Ø upper blade:130 mm. Ø lower blade:130 mm. Number of cutting heads:6. Machine dimensions: 2350x1100x1600 mm. Equipped with: Circular blades:6.

SERTOM-CASANOVAS plate bending machine. Max bending:3050 mm. Pre-bending capacity:32 mm. Bending capacity:50 mm. Roller stations Ø:500 mm. Side rollers Ø:400 rpm. Power: 37 Kw - 400 V - 50 Hz. Approx machine weight: 52000 kgs. Machine dimensions:4550x2100x1800 mm.
Equipped with:
CN for bending
SIAM hydraulic L-rafter
Ferrule side support

RECORTADORA BORDONADORA HIDRÁULICA MARCA DENN MODELO RBI-70 DE OCASIÓN:
DENN RBI-70
DESCRIPCIÓN:
 Recortadora Bordonadora Hidráulica marca denn modelo rbi-70
Recorta y bordona Todas clases de Figuras Redondos Cuadrados Rectangular Etc.
CARACTERÍSTICAS ESTANDAR:
 
Maximo Diámetro admitido
 700 mm
Potencia motor
             &nb

PLEGADORA HIDRÁULICA CONVENCIONAL REVISADA MARCA OMAG DE OCASIÓN:
MODELO 5020
CARACTERISTICAS:
Longitud útil
 2.560 mm
Fuerza
                 50 TN
Velocidad de aproximación
                 70 mm/seg.
Velocidad de trabajo
     &nb

PLEGADORA SINCRO-ELECTRONICA MEBUSA PH-80/308Y DE OCASIÓN:
-          Mod. PH-90/309Y 
            (SINCRO-ELECTRÓNICA – 3 EJES CNC)
CARACTERISTICAS:
Longitud útil
   3.100 mm.
Fuerza
              90 TN.
Velocidad de aproximación
 &nbs

PLEGADORA HIDRÁULICA CONVENCIONAL MEBUSA DE OCASIÓN REVISADA:
MOD. RG-20/33
 
CARACTERISTICAS:
 Longitud útil
 2.000 mm
Fuerza
                 33 TN
Velocidad de trabajo
                 10 mm/seg.
Velocidad de retorno
     

CIZALLA HIDRAULICA PENDULAR AJIAL  MOD. AJIAL CS-1040 - OCASION -
 
CARACTERISTICAS:
 
Longitud de corte
      4.100 mm
Capacidad de corte (ST 42)
                   10 mm
Longitud tope trasero
              1.100 mm
Angulo de corte
   

made in 2009
working area: 3000 x 1500 mm Laser power: 4400W CNC control: Byvision Blower time: approx. 26.000 hours Cutting time: approx. 14.500 hours Accessories: Shuttle table system with 2 interchanging tables automatic focus adjustment Bypos monitoring of cutting process CutControl ByVision CNC control, STL-SPS-controller with uninterrupted power supply (USV) for panel PC crossjet for lateral jets of oil mist to improve the process of piercing and star-up operator panel wi

Potencia 30 tm 
Formato chapa sin reposicion  1000 x 2000
Maquina muy bajo consumo electrico
mesas de cepillos
posibilidad  de Software Cad Cam

Potencia 22 tm 
Formato chapa sin reposicion  1500 x 2000
Maquina muy bajo consumo electrico, muy poco uso.
mesas de cepillos + bolas 
Torreta con seis alojamientos " d " tres de ellos indexados admiten multitool
Control de altura y presion del cabezal   " cp system "
Herramientas a, b, c, y  d  intercambiables en la torreta 
Software Cad Cam

• Année de fabrication 2006• 46.000 heures de fonctionnement• Format 1500x3000• Résonateur Prima 4000 watts CO2• Tête autofocus• Tête haute vitesse à cinématique parallèle

Le constructeur Prima-Power propose une machine d'occasion :
• Année de fabrication 2004• 36.000 heures de fonctionnement• Format 1500x3000• Résonateur Rofin SLAB 2.500 watts• Tête autofocus• Changeur automatique de palette• Palonnier de chargement annexe

We present semi-automatic grinding machine F-Grinder to sharp punching tools (punches and dies) for various models and systems of punching presses: Trumpf Trumatic, Trumpf Trupunch, Boschert, Haco, Pullmax , Amada, Finn-Power, Prima-Power, Durma, Schiavi, LVD, Strippit, Danobat, Yawei, Nisshinbo, Euromac, Baykal, FIM, Murata Muratec, Rainer, MVD, Tailift, SimasV, Yangli, Peliant, SNK, Pullmax, Hesse-Maschinen, Ermaksan, Dener, ITEK, SMD etc.
Grinding of punches and dies with height up to 23

Scie à Ruban Kaston Hba 420 Occasion Rare à la Vente  
Capacite de Coupe 420 mm Dimensions du Ruban 6300 x 38 x 1.3 mm
Vitesse Réglable 20 à 130 m/min
Puissance Moteur Scie 5.5 kw
Dimensions 2429 x 3334 x 2235 mm
Poids 2950 kgs 
Alimentation en 380 Volt
Conformité CE Manuel d'Utilisateur
C

PLEGADORA HIDRÁULICA CONVENCIONAL AJIAL Mod.PH-653 - OCASION -
 
CARACTERISTICAS:
 
Longitud útil
3.050 mm
Fuerza
65 TN
Velocidad de aproximación
70 mm/seg.
Velocidad de trabajo
6 mm/seg.
Velocidad de retorno
60 mm/seg.
Potencia motor
5,5 Kw.
Apertura
335 mm
Carrera
100 mm
Ancho mesa
105 mm
Cuello de cisne
400 mm
Entre montantes
2.540 mm

MUESCADORAS/ESCANTONEADORAS  COMACA Mod. VAR-225 - OCASION -
 
 
CAPACIDAD 30°a 135° - 225 x 225 x 6 mm
CORTE DE ANGULO VARIABLE.
 
 
 

MUESCADORAS FIM  Mod.VERSAFIX 254 -  OCASION -.
Escantoneadora/Muescadora FIM
 
 
CAPACIDAD 90° - 250 x 4 mm, CORTE POR ANGULO FIJO.
 

CURVADORA TRANSFLUID CON ALMA HIDRAULICA DB2060K - OCASION -
Modelo: DB 2060 K Año: 1999 Curvadora de mandrino electró-hidràulica. CARACTERISTICAS: Capacidad: - Tubo de acero Ø 20 – rect. 60 x 4 mm  - Tubo de Inox Ø 20 – rect. 50 x 3 mm  - Espesor max. 6,2 mm  - Max. Angulo de curvado 180 °  - Max. Radio 125 mm  - Velocidad de curvado 8 seg. 
- Display digital NC TRANSFLUID IPU 4 - Almacon sistema  r

CURVADORAS UNIVERSALES MARCA BIRLIK Mod.PHB-125 - OCASION -
 
DESCRIPCIÓN:
 
 Las curvadoras universales de la serie PHB son de funcionamiento hidrodinámico, el accionamiento se realiza mediante un pupitre móvil, la construcción es íntegramente en acero de ST 52. Este modelo nos permite la posibilidad de trabajar en posición horizontal y vertical.
 
 Las curvadoras universales BIRLIK están equ

PLEGADORA HIDRÁULICA CONVENCIONAL-AJIAL Mod.PH-653 - OCASION -
CARACTERISTICAS:
Longitud útil: 3.050 mm
Fuerza: 65 TN
Velocidad de aproximación: 70 mm/seg.
Velocidad de trabajo: 6 mm/seg.
Velocidad de retorno: 60 mm/seg.
Potencia motor: 5,5 Kw.
Apertura: 335 mm
Carrera: 100 mm
Ancho mesa: 105 mm
Cuello de cisne: 400 mm
Entre montantes: 2.540 mm
Altura de trabajo: 900 mm
Peso: 7.250 Kg.
Año de

PLEGADORA HIDRÁULICA CONVENCIONAL MARCA CASANOVAS Mod.XC-12.175 - OCASION-
 
CARACTERISTICAS:
Longitud útil: 6.100 mm
Fuerza: 175 TN
Velocidad de aproximación: 70 mm/seg.
Velocidad de trabajo: 7 mm/seg.
Velocidad de retorno: 60 mm/seg.
Potencia motor: 11,4 Kw.
Apertura: 350 mm
Carrera: 150 mm
Ancho mesa: 140 mm
Cuello de cisne: 500 mm
Entre montantes: 4.150 mm
Altura de trabajo: 1.100 mm + foso de 5