MD Jet Waterjet Cutting Machines

MD Jet waterjet cutting machine

About MD JET:

The water jet MD JET cutting table is a compact flying beam-type table, constituted of a cast steel frame suffering no distorsion. With its reliable precision, it combines quality and long lifetime thanks to its special design made to minimize the machine wear due to the hostile environment with abrasive cutting.

Technical description:

The MD JET water jet cutting system is constituted of a cast cantilever frame (flying beam to facilitate loading by 3 sides of the machines) that can be equipped with 1 or 2 pneumatic cutting heads with very high performance.

The X, Y and Z axes are fitted with transmission by ball screws, linear rail guides and prismatic linear rails mounted on the frame previously rectified by a machining centre as well as Brushless motors with incorporated incremental encoder, protective casing against abrasive spraying and automatic lubrication.

The well achieved designed and the use of top range components allows to minimize the machine wear coming from an hostile environment with hydro-abrasive cutting and to guarantee a reliable precision while running with low production costs.

• Qualitative components and material selection (guiding, ball screws shaft, nuts, sensors, cables, mechanical and electric components, etc.)  CE standards
• Separated frame and tank
• Precision: +/- 0.1mm
• Repeatability: +/- 0.05mm

Useful surfaces available (XxYxZ):
1505mm x 2005mm x 210 mm (option 310mm and 500mm)
1505mm x 2505mm x 210 mm (option 310mm and 500mm)
1505 mm x 3005 mm x 210 mm (option 310 mm y 500 mm)
2005mm x 2005mm x 210 mm (option 310mm and 500mm)
2005mm x 2505mm x 210 mm (option 310mm and 500mm)
2005mm x 3005mm x 210 mm (option 310mm and 500mm)
2005mm x 4005mm x 210 mm (option 310mm and 500mm)
2005mm x 6005mm x 210 mm (option 310mm and 500mm)
2005mm x 8005mm x 210 mm (option 310mm and 500mm)
2005mm x 10005mm x 210 mm (option 310mm and 500mm)
2005mm x 12005mm x 210 mm (option 310mm and 500mm)
and more in length.