loader

20 HR LP Manual Brakes

20 HR LP
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 20
  • Min Stroke (mm) 0
  • Max Stroke (mm) 60
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 250
  • Min Vertical Clearance (mm) 230
  • Max Vertical Clearance (mm) 290
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 200
  • Max Table Length (mm) 200
  • Min Table Width (mm) 300
  • Max Table Width (mm) 300
  • Weight (kg) 70
  • Width (mm) 0
  • Depth (mm) 0
  • Height (mm) 0
local check

15 HR LP Manual Brakes

15 HR LP
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 15
  • Min Stroke (mm) 30
  • Max Stroke (mm) 60
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 220
  • Min Vertical Clearance (mm) 220
  • Max Vertical Clearance (mm) 280
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 200
  • Max Table Length (mm) 200
  • Min Table Width (mm) 250
  • Max Table Width (mm) 250
  • Weight (kg) 55
  • Width (mm) 190
  • Depth (mm) 490
  • Height (mm) 562
local check

20 HR Manual Brakes

20 HR
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 20
  • Min Stroke (mm) 0
  • Max Stroke (mm) 60
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 130
  • Min Vertical Clearance (mm) 120
  • Max Vertical Clearance (mm) 280
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 220
  • Max Table Length (mm) 220
  • Min Table Width (mm) 200
  • Max Table Width (mm) 200
  • Weight (kg) 65
  • Width (mm) 220
  • Depth (mm) 350
  • Height (mm) 650
local check

15 HR Manual Brakes

15 HR
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 15
  • Min Stroke (mm) 0
  • Max Stroke (mm) 60
  • Width Between Uprights (mm) 102
  • Max Throat Depth (mm) 102
  • Min Vertical Clearance (mm) 60
  • Max Vertical Clearance (mm) 250
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 200
  • Max Table Length (mm) 200
  • Min Table Width (mm) 180
  • Max Table Width (mm) 180
  • Weight (kg) 32
  • Width (mm) 175
  • Depth (mm) 285
  • Height (mm) 497
local check

7 HR Manual Brakes

7 HR
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 7
  • Min Stroke (mm) 0
  • Max Stroke (mm) 40
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 95
  • Min Vertical Clearance (mm) 35
  • Max Vertical Clearance (mm) 260
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 160
  • Max Table Length (mm) 160
  • Min Table Width (mm) 145
  • Max Table Width (mm) 145
  • Weight (kg) 25
  • Width (mm) 240
  • Depth (mm) 250
  • Height (mm) 700
local check

5 HR Manual Brakes

5 HR
local check

The manual toggle presses have the maximum power, from 500 to 2000 kg, obtained only at the end of the travel according to the applied load on the lever.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Genouillère
  • Force (kN) 5
  • Min Stroke (mm) 50
  • Max Stroke (mm) 50
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 72
  • Min Vertical Clearance (mm) 42
  • Max Vertical Clearance (mm) 185
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 100
  • Max Table Length (mm) 100
  • Min Table Width (mm) 70
  • Max Table Width (mm) 70
  • Weight (kg) 9
  • Width (mm) 100
  • Depth (mm) 165
  • Height (mm) 581
local check

50 HR Manual Brakes

50 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 50
  • Min Stroke (mm) 0
  • Max Stroke (mm) 500
  • Width Between Uprights (mm) 250
  • Max Throat Depth (mm) 250
  • Min Vertical Clearance (mm) 0
  • Max Vertical Clearance (mm) 530
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 210
  • Max Table Length (mm) 210
  • Min Table Width (mm) 250
  • Max Table Width (mm) 250
  • Weight (kg) 145
  • Width (mm) 300
  • Depth (mm) 500
  • Height (mm) 1345
local check

14 HR Manual Brakes

14 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 14
  • Min Stroke (mm) 0
  • Max Stroke (mm) 420
  • Width Between Uprights (mm) 210
  • Max Throat Depth (mm) 210
  • Min Vertical Clearance (mm) 0
  • Max Vertical Clearance (mm) 420
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 240
  • Max Table Length (mm) 240
  • Min Table Width (mm) 200
  • Max Table Width (mm) 200
  • Weight (kg) 45
  • Width (mm) 200
  • Depth (mm) 385
  • Height (mm) 862
local check

4 HR Manual Brakes

4 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 6
  • Min Stroke (mm) 0
  • Max Stroke (mm) 100
  • Width Between Uprights (mm) 95
  • Max Throat Depth (mm) 95
  • Min Vertical Clearance (mm) 46
  • Max Vertical Clearance (mm) 280
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 160
  • Max Table Length (mm) 160
  • Min Table Width (mm) 145
  • Max Table Width (mm) 145
  • Weight (kg) 25
  • Width (mm) 160
  • Depth (mm) 250
  • Height (mm) 650
local check

3 HR Manual Brakes

3 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 4
  • Min Stroke (mm) 0
  • Max Stroke (mm) 80
  • Width Between Uprights (mm) 80
  • Max Throat Depth (mm) 80
  • Min Vertical Clearance (mm) 35
  • Max Vertical Clearance (mm) 270
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 130
  • Max Table Length (mm) 130
  • Min Table Width (mm) 120
  • Max Table Width (mm) 120
  • Weight (kg) 17
  • Width (mm) 195
  • Depth (mm) 210
  • Height (mm) 600
local check

2 HR Manual Brakes

2 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...


The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 2
  • Min Stroke (mm) 0
  • Max Stroke (mm) 50
  • Width Between Uprights (mm) 72
  • Max Throat Depth (mm) 72
  • Min Vertical Clearance (mm) 54
  • Max Vertical Clearance (mm) 200
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 100
  • Max Table Length (mm) 100
  • Min Table Width (mm) 70
  • Max Table Width (mm) 70
  • Weight (kg) 8
  • Width (mm) 100
  • Depth (mm) 165
  • Height (mm) 470
local check

50 HR LP Manual Brakes

50 HR LP
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame Col de Cygne
  • Main Machanism Crémaillère
  • Force (kN) 50
  • Min Stroke (mm) 0
  • Max Stroke (mm) 530
  • Width Between Uprights (mm) 300
  • Max Throat Depth (mm) 300
  • Min Vertical Clearance (mm) 0
  • Max Vertical Clearance (mm) 0
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 250
  • Max Table Length (mm) 250
  • Min Table Width (mm) 360
  • Max Table Width (mm) 360
  • Weight (kg) 145
  • Width (mm) 360
  • Depth (mm) 650
  • Height (mm) 1645
local check

4 HR LP Manual Brakes

4 HR LP
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame -
  • Main Machanism -
  • Force (kN) 6
  • Min Stroke (mm) 0
  • Max Stroke (mm) 100
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 155
  • Min Vertical Clearance (mm) 30
  • Max Vertical Clearance (mm) 400
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 0
  • Max Table Length (mm) 210
  • Min Table Width (mm) 0
  • Max Table Width (mm) 220
  • Weight (kg) 40
  • Width (mm) 0
  • Depth (mm) 0
  • Height (mm) 0
local check

18 HR Manual Brakes

18 HR
local check

Manual rack presses have a power output of 200 to 600 kg. Power is linear and constant over the whole travel depending on the applied load on the machine lever. It can be used for assembly operations, connections of bearings and rings, small forms, various crimping operations, etc ...

The high capacity rack-and-pinion manual presses complete the range of rack-and-pinion presses. With a power of 1400 kg to 5000 kg, these models perfectly correspond to a use such as assembly, connections and deep fitting and all applications requiring a travel and / or a significant clear height.

Specifications

  • Type of Frame -
  • Main Machanism -
  • Force (kN) 18
  • Min Stroke (mm) 0
  • Max Stroke (mm) 420
  • Width Between Uprights (mm) 0
  • Max Throat Depth (mm) 210
  • Min Vertical Clearance (mm) 0
  • Max Vertical Clearance (mm) 420
  • Min Slide Adjustment (mm) 0
  • Max Slide Adjustment (mm) 0
  • Min Table Length (mm) 0
  • Max Table Length (mm) 240
  • Min Table Width (mm) 0
  • Max Table Width (mm) 200
  • Weight (kg) 50
  • Width (mm) 0
  • Depth (mm) 0
  • Height (mm) 0
local check